What Bambu Lab announced, and the dates that matter
On 31 March 2026 Bambu Lab published a post saying the X1, X1 Carbon (X1C) and X1E had reached end of life, with end of manufacturing and active sales on that date [1]. Bambu Lab says its own direct online sales had already stopped some time before. New units may still be on sale through authorised distributors, and Bambu Lab says those units carry full warranty and support [1].
The post gives three later cut-off dates, and they matter more to owners than the end of sales. The table below sets them out. It also gives a rough count of how much time is left from 30 October 2026, the date of this check.
| What ends | Date given by Bambu Lab | Time left from 30 Oct 2026 | What it means in practice |
|---|---|---|---|
| Manufacturing and active sales | 31 March 2026 [1] | Already ended | New units only from remaining authorised-distributor stock |
| Firmware and software bug fixes and feature updates | 31 May 2027 [1] | About 7 months | After this date, do not expect new printer features or fixes for bugs found later |
| Security patches | 31 May 2029 [1] | About 31 months | After this date, think about how the printer connects to your network |
| Spare parts and technical support | 31 March 2031 [1] | About 53 months | Parts are sold through the online store and service centres, but Bambu Lab warns some may sell out earlier [1] |
If you own an X1 Carbon: a dated plan
You do not need to replace a working X1C now. Your printer is the same one it was before the announcement. What changes is the support around it, and each date asks something different of you.
The EOL post names Bambu Studio and Bambu Handy but gives no separate end date for the slicer, the app or cloud services [1]. If you rely on remote printing, ask Bambu Lab support how long it will work rather than assuming it follows one of the dates above.
- Now: list the parts you replace most often and check they are still in stock. Bambu Lab warns that some spare parts may sell out before 31 March 2031 [1].
- Before 31 May 2027: install the last feature and bug-fix firmware while that window is open, and note the version you are on [1].
- Before 31 May 2029: decide whether the printer still needs internet access. When security patches stop, you can reduce exposure by limiting how the printer connects.
- Before 31 March 2031: technical support and spare-part supply end on this date [1]. That is a sensible point to plan a replacement if the printer is central to a business.
- Selling: give a buyer these dates in writing. They change what a used X1C is worth.
Buying a new X1C from remaining stock: the worked numbers
Say you find a new X1C from an authorised distributor on 30 October 2026. Bambu Lab says distributor units carry full warranty and support [1]. The software clock is already running, though. You would get about 7 months of feature updates, about 31 months of security patches and about 53 months of spare parts and technical support. All of these dates are fixed in the EOL post [1].
A newly launched model starts its support period on its own launch date, not on 31 March 2026. Bambu Lab launched the X2D on 14 April 2026, and its post gives US prices of $649 for the X2D and $899 for the X2D Combo, before tax [2]. Distributor prices for leftover X1C stock vary, so compare a quoted X1C price with the X2D before buying. A large discount may be the only reason to choose an end-of-life model.
Where to go next: replacements compared on official specs
Bambu Lab calls the X2D the second generation of its flagship X Series [2]. Its main hot end prints 256 x 256 x 260 mm. A second auxiliary hot end prints supports, and the chamber heats to 65 °C [2]. The H2S launch post says its build volume is 220% that of the X1C [3]. The table uses launch-post prices for Bambu Lab and the US store sale prices shown on 30 October 2026 for Creality. Store prices change often, so recheck on the day you buy.
| Model | Build volume | Max nozzle | Chamber heating | Listed price (source) | Fits |
|---|---|---|---|---|---|
| Bambu Lab X2D | 256 x 256 x 260 mm (main nozzle) [2] | 300 °C [2] | Actively heated to 65 °C [2] | $649; Combo $899, US before tax, launch post 14 Apr 2026 [2] | X1C owners who want the closest X-series successor |
| Bambu Lab P2S | 256 x 256 x 256 mm [4] | 300 °C [4] | No chamber temperature in launch post; airflow system retains heat [4] | €519; Combo €749 incl. tax, launch post 14 Oct 2025; no US price in post [4] | Everyday multicolour printing; Combo includes AMS 2 Pro [4] |
| Bambu Lab H2S | 340 x 320 x 340 mm [3] | 350 °C [3] | Actively heated to 65 °C [3] | $1,249; AMS Combo $1,499, launch post [3] | Larger parts and engineering filaments |
| Creality K2 | 260 x 260 x 260 mm [5] | 300 °C [5] | No active heating listed [5] | $419 sale (regular $549); Combo $521 sale, US store 30 Oct 2026 [6] | Lowest price in this table; the $419 option is listed as without CFS [6] |
| Creality K2 Pro | 300 x 300 x 300 mm [5] | 300 °C [5] | Active, up to 60 °C [5] | $799 sale (regular $1,099), US store 30 Oct 2026 [7] | Heated chamber on a bigger bed |
| Creality K2 Plus | 350 x 350 x 350 mm [5] | 350 °C [5] | Active, up to 60 °C [5] | $999 sale (regular $1,299); Combo $1,199 sale, US store 30 Oct 2026 [7] | Largest volume in this table |
| Creality K1C | Not stated on the cited spec page | 300 °C [8] | Not stated on the cited spec page | $499 sale (regular $559), US store 30 Oct 2026 [9] | Lists ASA, ABS and PA-CF among supported filaments [8] |
Choose by what the X1C was doing for you
Choose a replacement for the job your X1C was doing, not for the model name on the front.
- ABS, ASA or carbon-fibre-filled parts: pick a printer with a published heated chamber, such as the X2D or H2S at 65 °C [2][3], or the K2 Pro or K2 Plus at 60 °C [5]. Creality lists ASA, ABS, PA-CF and PPA-CF for the K2 Plus [10].
- Mostly PLA and PETG in several colours: the P2S Combo ships with the AMS 2 Pro [4]. Creality lists the plain K2 as without CFS and the K2 Combo as a separate option, and says four CFS units allow up to 16 colours [6].
- Bigger parts than the X1C could print: the H2S (340 x 320 x 340 mm) [3] or K2 Plus (350 x 350 x 350 mm) [5].
- Lowest spend: the K2 without CFS at a $419 sale price on the US store on 30 October 2026 [6]. Check that its unheated chamber suits your materials first [5].
- If you need parts compatibility with your existing X1C fleet, ask Bambu Lab which accessories carry over before you mix models. The EOL post does not cover this [1].
Questions before you decide
Is the Bambu Lab X1 Carbon discontinued?
Yes. Bambu Lab announced that the X1, X1C and X1E reached end of life on 31 March 2026, the date manufacturing and active sales ended. Remaining new units may still be available from authorised distributors.
How long will Bambu Lab support the X1C?
Bambu Lab gives bug fixes and feature updates until 31 May 2027, security patches until 31 May 2029, and spare parts and technical support until 31 March 2031, though it says some parts may sell out earlier.
Is a new X1C from a distributor still covered by warranty?
Bambu Lab says units held by authorised distributors are covered by full warranty and support. The software support dates still run from the March 2026 announcement, not from your purchase date.
What replaced the X1 Carbon?
Bambu Lab describes the X2D, launched on 14 April 2026, as the second generation of its flagship X Series. Its launch post lists a 300 °C nozzle, a chamber heated to 65 °C and US prices of $649, or $899 for the Combo, before tax.
Sources & verification
Product details and prices can change. Check the linked provider before buying.
- Bambu Lab blog: The X1-series is EOL - the standard it set will remain forever (31 Mar 2026) Accessed 30 Oct 2026
- Bambu Lab blog: Xcellence made simple - Bambu Lab presents the X2D (14 Apr 2026) Accessed 30 Oct 2026
- Bambu Lab blog: H2S, the ultimate single-nozzle 3D printer (26 Aug 2025) Accessed 30 Oct 2026
- Bambu Lab blog: The Icon Redefined: meet the P2S (14 Oct 2025) Accessed 30 Oct 2026
- Creality: K2 series product comparison Accessed 30 Oct 2026
- Creality store: K2 Combo listing Accessed 30 Oct 2026
- Creality store: K2 series collection Accessed 30 Oct 2026
- Creality support: K1C specifications Accessed 30 Oct 2026
- Creality store: K1C listing Accessed 30 Oct 2026
- Creality support: K2 Plus Combo specifications Accessed 30 Oct 2026
Sources link directly to providers. Product buttons may use separately labeled affiliate links. Read our disclosure.